Steel Guitar Strings
Strings & instruction for lap steel, Hawaiian & pedal steel guitars
http://SteelGuitarShopper.com
Ray Price Shuffles
Classic country shuffle styles for Band-in-a-Box, by BIAB guru Jim Baron.
http://steelguitarmusic.com

This Forum is CLOSED.
Go to bb.steelguitarforum.com to read and post new messages.

Note: This is an archived topic. It is read-only.
   The Steel Guitar Forum
  Bar Chatter Archive
  Peavey RC 2000 Controller

UBBFriend: Email This Page to Someone!

profile | register | preferences | faq | search



This topic was originally posted in this forum: Wanted To Buy
Author Topic:   Peavey RC 2000 Controller
Kenneth Kotsay
Member

Posts: 306
From: Davie, Florida
Registered: JAN 2000

posted 09 July 2000 03:56 PM     Click Here to See the Profile for Kenneth Kotsay     

Here's an idea for Peavey, why not produce a RC 2000 remote for use on a combo rack unit like the following:
Peavey DPC 1400 or DPC 1000 & TransTubeFex or ProfexII and Nashville 112Es speaker cabs.
I have all the above plus a Nashville 400 and Session 500. I'm not yet ready for the new 1000 or 2000 since I just purchased the
DPC 1400 about 5 months ago. It would be nice to have this RC 2000 controller attached to the leg of the steel controlling a set up like the one above.


Ken




Danny Hullihen
Member

Posts: 1782
From: Harrison, Michigan
Registered: AUG 99

posted 10 July 2000 08:07 AM     Click Here to See the Profile for Danny Hullihen     
Ken,
As long as your TubeFex and/or TransTubeFex has an eight pin midi jack (din connector) and I beleive it does, you can use the RC 2000 with those processors. I haven't had a chance to try this yet, but I believe it would work.



Mike Brown
Member

Posts: 3373
From: Meridian, Mississippi USA
Registered:

posted 10 July 2000 10:35 AM     Click Here to See the Profile for Mike Brown     
Hello Danny and Kenneth,
The Peavey RC2000 midi remote handcontroller will work as a controller for the Peavey Session 2000, Transtube Fex, Tubefex and the Profex II processor units. This RC2000 does attach to the leg of the steel guitar for convenience.

The LCD(liquid crystal display)on the RC2000 will not display the same "name" of the preset when using it with the Profex II unit, but will display the number of the preset. Using it with the Tubefex, Transtube Fex and Session 2000 units will result with both units showing identical names of the presets on both LCD screens.

For more information on the new Peavey Nashville 1000, Session 2000, RC2000 midi remote controller or the PX300 powered extension speaker, you may contact Mike Brown
at Peavey. Our toll free U.S. number is 1-877-732-8391 and outside the U.S., our number is (601)483-5365.

All times are Pacific (US)

This is an ARCHIVED topic. You may not reply to it!
Hop to:

Contact Us | Catalog of Pedal Steel Music Products

Note: Messages not explicitly copyrighted are in the Public Domain.


Ultimate Bulletin Board 5.46

Our mailing address is:
The Steel Guitar Forum
148 South Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support the Forum