Steel Guitar Strings
Strings & instruction for lap steel, Hawaiian & pedal steel guitars
http://SteelGuitarShopper.com
Ray Price Shuffles
Classic country shuffle styles for Band-in-a-Box, by BIAB guru Jim Baron.
http://steelguitarmusic.com

This Forum is CLOSED.
Go to bb.steelguitarforum.com to read and post new messages.



Note: This is an archived topic. It is read-only.
  The Steel Guitar Forum
  Pedal Steel Archive
  Strings for E9 and C6 (Page 2)

UBBFriend: Email This Page to Someone!

profile | join | preferences | help | search


This topic is 2 pages long:   1  2 
This topic was originally posted in this forum: Pedal Steel
Author Topic:   Strings for E9 and C6
Allen
Member

Posts: 273
From: Littleton, CO USA
Registered: DEC 2000

posted 14 December 2000 02:17 PM     Click Here to See the Profile for Allen     
I am new to the PSG and learning alot from this forum.
Someone help me understand what to look for in string sets, i.e. brands, guages, type, etc. How long should a set last?
I don't need any now, but someday I will. I want to be somewhat educated by that point in time.

------------------
Allen Harry
Littleton, Colorado


Jack Stoner
Sysop

Posts: 8119
From: Inverness, Florida
Registered: DEC 99

posted 14 December 2000 02:38 PM     Click Here to See the Profile for Jack Stoner     
The fourm sell strings, that you may want to consider.

There are basically two types, nickel and stainless steel. Which type to use is personal preference.

There are basically two different gauge sets. The "Nashville" gauges and the "Tension Balanced".

I use Stainless Steel as I like the little brighter sound and the Nashville gauges.

Many people use modifed or custom sets, but what I have listed is the most common sets and usually what is available in packaged sets. The Nashville gauges are the most common gauges, however you can't walk into any music store and get pedal steel strings. In most cases you will have to purchase them from someone who deals in pedal steels and accesories. Again, the forum has Jagwire brand strings. Other common string sets are GHS, George L's (stainless steel only), and SIT. There are other brands but the ones listed are the most widely used brands. Most steel guitar manufacturers sell their branded string sets, such as Emmons, Zum, Carter, etc.



Tommy M
Member

Posts: 914
From: Indiana
Registered: MAY 99

posted 14 December 2000 03:03 PM     Click Here to See the Profile for Tommy M     
Another good string is Bobbe Seymour's Cobra Coil Strings. Call:615-859-7666. I've been switching back and forth between those and Jagwire strings for the past year or so. Which as mentioned above, can be ordered right here on the Steel Guitar Forum.

------------------
Tommy Minniear


Bobby Lee
Sysop

Posts: 14849
From: Cloverdale, North California, USA
Registered:

posted 14 December 2000 04:23 PM     Click Here to See the Profile for Bobby Lee     
Here's a good article by master player Paul Franklin on the subject: www.b0b.com/infoedu/steelstr.htm .

Jagwire strings can be purchased here: www.b0b.com/products/strings.html . The Tommy White Signature strings are the most popular of the ones we carry.

------------------
Bobby Lee - email: quasar@b0b.com - gigs - CDs
Sierra Session S-12 (E9), Speedy West D-10 (E9, D6),
Sierra 8 Laptop (D13), Fender Stringmaster D-8 (D13, A6)


Steven Cherson
Member

Posts: 51
From: Atlantic Beach, N.Y.
Registered: DEC 98

posted 14 December 2000 05:45 PM     Click Here to See the Profile for Steven Cherson     
Jack, what is the difference between the Nashville and Tension Balanced strings


Jack Stoner
Sysop

Posts: 8119
From: Inverness, Florida
Registered: DEC 99

posted 15 December 2000 03:52 AM     Click Here to See the Profile for Jack Stoner     
The gauges are different. The Nashville gauges tend to be lighter, e.g. a .020 for the 6th (G#) where the Tension usually uses a .022P for that string. Scotty's and George L's strings web sites both list the different gauges. The Steel Guitar Forum may have both gauges listed, the link is on b0b's post above.

I use the Nashville gauges on my Franklin, as that was what was recommended by the Franklin Guitar Co.

Allen
Member

Posts: 273
From: Littleton, CO USA
Registered: DEC 2000

posted 15 December 2000 08:54 AM     Click Here to See the Profile for Allen     
I thank all of you for your replies. Bobby, after reading Paul Franklin's article, I wonder if his view on the frequency of changing represents an "ideal" interval as opposed to "reality". I play every day for 1 to 2 hours, but not as a pro., only for my lesson practice and learning. What might be an acceptable interval between strings changes for my level of play.

------------------
Allen Harry
Littleton, Colorado


Bobby Lee
Sysop

Posts: 14849
From: Cloverdale, North California, USA
Registered:

posted 15 December 2000 08:35 PM     Click Here to See the Profile for Bobby Lee     
Change them when they start sounding dead.


This topic is 2 pages long:   1  2 

All times are Pacific (US)

This is an ARCHIVED topic. You may not reply to it!
Hop to:

Contact Us | Catalog of Pedal Steel Music Products

Note: Messages not explicitly copyrighted are in the Public Domain.


Ultimate Bulletin Board 5.46

Our mailing address is:
The Steel Guitar Forum
148 South Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support the Forum