Steel Guitar Strings
Strings & instruction for lap steel, Hawaiian & pedal steel guitars
Ray Price Shuffles
Classic country shuffle styles for Band-in-a-Box, by BIAB guru Jim Baron.

This Forum is CLOSED.
Go to to read and post new messages.

  The Steel Guitar Forum
  Question about Korg WT-10A tuner

Post New Topic  
your profile | join | preferences | help | search

next newest topic | next oldest topic
Author Topic:   Question about Korg WT-10A tuner
Dennis Detweiler

From: Solon, Iowa, US

posted 21 October 2001 07:07 PM     profile     

I bought a WT-10A tuner. I don't have a manual for it. There is an adjustment inside a small hole in the back of it. What is it for?
Also, there is no light inside the meter. Is there a bulb burned out or is it not built with a light?
Dennis old is it? serial# 703654

[This message was edited by Dennis Detweiler on 21 October 2001 at 07:20 PM.]



posted 21 October 2001 07:18 PM     profile     
The hole has an adjustment to calibrate it. When you put a metal screwdriver in it will ghange a little, so if you calibrate it, check it after you remove the screwdriver. There is no light in it. The knob on the side is just for the pitch of the audible tone. I better stop now, I'm starting to sound like I know what I am talking about.


Bill Crook

From: Goodlettsville, TN , Spending my kid's inheritance

posted 22 October 2001 12:50 AM     profile     
If you calibrate the tuner,I would suggest useing a Good tunnin' fork or other calibrated standard. (NOT one of those cheap silver lookin' ones)
There are other internal trimmers and pots inside of the tuner. STAY AWAY FROM THEM !!! If you tweak these, It won't make no difference how much you try, you'al never get the thing to work right. These pots are factory settings and are more for internal electronic freq shaping in nature,not adjusting/calibrating of the tone heard by the tuner.
Bill Sharpe

From: Hermitage, TN 37076, USA

posted 22 October 2001 06:18 AM     profile     
What Larry said: I've had mine since 1978 and and it still works great. I use an A-440 tuning fork to calibrate the tuner maybe once a year and it still works terrific. I have also purchased a couple Korg CA-20's and love 'em. This WT10A is great tuner, I'll check to see if I still have the manual.

All times are Pacific (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  
Hop to:

Contact Us | The Pedal Steel Pages

Note: Messages not explicitly copyrighted are in the Public Domain.

Powered by Infopop © 2000
Ultimate Bulletin Board 5.46

Our mailing address is:
The Steel Guitar Forum
148 South Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support the Forum