|
Author
|
Topic: Dobro bridge material
|
Bob Stone
Member From: Gainesville, FL, USA
|
posted 22 March 2001 06:25 AM
profile send email edit
I recently had a Paul Beard's maple/ ebony bridge, bone nut and Quarterman cone installed in my OMI Dobro by my local repairman. For the most part, I'm very happy with the sound, but sometimes I wonder if the bridge isn't a little too bright. Of course, when it is sounding a little too bright in a particular room and/or playing context I can compensate by picking a little farther down the neck.I'd be interested in hearing comments from those who have experimented with various bridge materials on resos, particularly Dobros. Thanks, Bob[This message was edited by Bob Stone on 22 March 2001 at 06:28 AM.] |
Ric Nelson
Member From: Silver Spring, Maryland
|
posted 22 March 2001 08:47 AM
profile send email edit
Paul did the same for me on one of my dobros and your are right, any and all of the three items he changed will tend to give you a brighter sound, especially the Quarterman, in addition to having new strings. But remember, when you are over the instrument playing, what you hear may be brighter than what someone else hears in the room or over a mic. Your ear has to get used to the new sound. Try playing it softer and see what happens. |
Andy Volk
Member From: Boston, MA
|
posted 22 March 2001 01:11 PM
profile send email edit
Doesn't Paul offer an alternative to the ebony-capped maple bridges for a warmer tone? Birch? I believe Mike Auldridge uses something other than ebony-maple. |
Sage
Member From: Boulder, Colorado
|
posted 22 March 2001 01:40 PM
profile send email edit
Paul's catalog says birch for Mike Auldridge. Not offered (probably for a reason) is basswood which I believe would be softer still. Then comes balsa.  sorry, I couldn't resist. They're even in alphabetical order.------------------
T. Sage Harmos
Musical Instruments |
Mike D
Member From: Phx, Az
|
posted 22 March 2001 03:22 PM
profile send email edit
I've played around a little with saddle materials. I had a Maple/wEbony cap on a steel tricone...ughhh way too tinny. Eventually went with straight Maple.I liked the Maple/Ebony combo though on both a brass body biscuit cone Dobro and a Regal spider cone guitar I refitted with a Quarterman cone. The Ebony does help the low end alot so a compromise if the high strings are too bright is to leave the M/E on the bass and go straight Maple on the top. Pretty easy to do on a spider bridge with a split saddle. |
Bob Stone
Member From: Gainesville, FL, USA
|
posted 23 March 2001 12:20 PM
profile send email edit
Thanks for some interesting exchanges. My OMI Dobro needs all the help it can get on the bass. The idea of using one bridge saddle material for the 3 bass strings and a different material for the 3 treble strings is interesting. Anybody out there ever tried it?The point about the projected sound differing from the sound heard by the player rings true. I played fiddle for years and it's right under your ear--sounds a whole lot different out front a few feet. The Dobro is similar in that the sound is coming back into the player's face at pretty close range. Guess a real test would be to listen to someone else play my instrument. |
gerry szostak
Member From: windsor,ca,
|
posted 26 March 2001 12:07 AM
profile send email edit
I play a Jerry Douglas that has ebony on the wound strings and maple on the unwound strings. The maple seems to cut the harshness from the unwound stings and the ebony gives a big kick to the wound stings. The lower strings seem to sound espically nice. The maple insert is just on the two top strings. |
Bob Stone
Member From: Gainesville, FL, USA
|
posted 26 March 2001 06:05 AM
profile send email edit
Interesting Gerry. Is that a Gibson Dobro? Is that a stock bridge you described or something custom made?Thanks, Bob |
D Schubert
Member From: Columbia, MO, USA
|
posted 26 March 2001 06:43 AM
profile send email edit
I had to have the saddle replaced on my pre-war Dobro Model 45. My guitar tech told me that he'd put a bone saddle in several biscuit-type resonators guitars -- which seemed to improve the sustain & volume & projection -- and suggested that I try that instead of maple on my spider bridge. He promised that if I didn't like the bone saddle, he would pull it out and replace it for no charge. Why not? Anyway, that was more than two years ago, and I haven't asked him to change it back. I know that a bone saddle is "all wrong" according to the experts, but it sure did improve the sustain & volume & projection. And the tone did not suffer, IMHO. I don't think that I lost any bass response at all, and the higher notes are more "authoritative" -- if that's the right word. Seems like no two resonator guitars are alike, but this sure helped mine out. |
Kenny Davis
Member From: Great State of Oklahoma
|
posted 26 March 2001 11:05 AM
profile send email edit
I replaced the bridge inserts on my '74 Dobro with maple/ebony, and it improved volume & tone. Besides the string spacing being off on one string on the original, the tone didn't seem to have the "reso" sound. The bridge helped out a lot. A bone nut will be my next mod.A resonator guitar is worse than a pedal steel when it comes to wondering how it sounds. You really need to have someone play it for you, and listen to it that way. The problem with that though, is nobody plays the same way that you do! |
gerry szostak
Member From: windsor,ca,
|
posted 31 March 2001 01:24 PM
profile send email edit
Hello Bob The bridge I described came from the factory with that setup. I have not been able to find another one like it. If it wears out I guess I'll have make one.------------------
|
The Steel Guitar Forum
