|
Author
|
Topic: Any ideas for a lap steel stand?
|
Cliff Scholle
Member From: Santa Barbara, CA, USA
|
posted 12 February 2002 03:49 AM
profile send email edit
I'm looking for ideas for a lap steel stand. Has anyone here made one using a tripod stand or a keyboard stand? I'd appreciate any input. Thanks. |
Peter Jacobs
Member From: Northern Virginia
|
posted 12 February 2002 06:52 AM
profile send email edit
I used an X-type keyboard stand successfully -- it was the easiest to find and least expensive solution. It's also lightweight and folds flat. (I also have a Melobar Outrigger, which lets me move around on stage). Regards, PJJ |
Rick Aiello
Member From: Berryville, VA USA
|
posted 12 February 2002 07:31 AM
profile send email edit
This is what I did...
http://steelguitarforum.com/Forum2/HTML/002556.html
|
Ray Montee
Member From: Portland, OR, USA
|
posted 12 February 2002 11:01 AM
profile send email edit
Because my Bakelite Rick kept slipping off my short fat legs.....I transformed my Yamaha drum stool into a guitar stand.
By placing one of the tri-pod legs directly under where the neck of the guitar would protrude beyond the round seat cushion; I then positioned the HEAVIEST and widest part of the Rick centered within that round seat cushion. I then used two very small diameter bunge cords over the guitar, one at around the 10th fret and the other over the peg on the butt end of the guitar. WORKS GREAT!
The guitar is low to the ground (if seated) and solidly mounted on the cushion which is non-skid, and the stand's leg beneath the guitar neck makes it rigid and most difficult to tip over.
It WORKED FOR ME! I had previously examined the keyboard stands but came away with a "shakey" feeling about them. |
Mark van Allen
Member From: loganville, Ga. USA
|
posted 14 February 2002 11:31 AM
profile send email edit
I have a great custom lap steel stand, fully adjustable black metal. It fits my Sierra laptop and a Melobar 8 string perfectly, so I would think it would adjust to most- My insane bandleader disbanded our band last week so lots of stuff's gotta go- $50 and shipping...------------------
Mark van Allen-"Blueground Undergrass" Pedal, Non-Pedal, Lap, and Dobro - c'mon by and visit: www.markvanallen.com |
Doug Beaumier
Member From: Northampton, MA
|
posted 14 February 2002 05:24 PM
profile send email edit
.... looks like Cliff already took up your offer in another post... Darnit!------------------
My Site | Doug's Free Tab
[This message was edited by Doug Beaumier on 14 February 2002 at 05:27 PM.]
|
Roger Shackelton
Member From: Everett, Wa.
|
posted 18 February 2002 12:07 AM
profile send email edit
Ted Smith at Melobar lists a 3 leg kit for lap steel guitars on his website. Check it out at: www.melobar.com Roger |
The Steel Guitar Forum
