Author
|
Topic: Beginner lap steel tuning for Nashville fan
|
Daniel Bennett Member From: Austin, Texas, USA
|
posted 14 January 2006 08:15 PM
profile edit
A friend is interested in learning how to play his six string lap steel, and he'd like to know what tuning to start off with. He likes Nashville-style country music like George Strait, which to me sounds like E9 pedal steel! I will encourage him to consider learning the pedal steel instead (get a Carter Starter) since that's the sound he likes, but for now, being broke and understandably intimidated by the pedal steel, he has a 6 string lap steel and a choice to make.What tuning do you think he should start off with? |
Olli Haavisto Member From: Jarvenpaa,Finland
|
posted 15 January 2006 12:51 AM
profile send email edit
I`ve always felt that if you want to emulate pedal steel sounds on another instrument, an electric guitar with light strings is a better choice than lap steel. So you`re right , your friend needs a PSG  ------------------ Olli Haavisto, Finland
[This message was edited by Olli Haavisto on 15 January 2006 at 12:53 AM.]
|
Rick Alexander Member From: Florida, USA
|
posted 15 January 2006 10:58 AM
profile send email edit
Try E tuning for starters - E B E G# B E It's as good as any tuning to learn picking, blocking, grips, slants, harmonics, vibrato etc. |
Steinar Gregertsen Member From: Arendal, Norway
|
posted 15 January 2006 11:21 AM
profile edit
Agreed on the E-tuning, and there's some very cool "old-time" country sounds in there once he learns some basic slanting.Steinar ------------------ www.gregertsen.com
|
John D. Carter Member From: Ohio, USA
|
posted 15 January 2006 05:09 PM
profile send email edit
I have been playing lap steel for about 4 weeks. (I had never held a bar in my hand before this.) I love steel in country and gospel. I started with E7 and found that it works good for gospel. However, I am getting my best early "Nashville" sound with C6. I am working on some of the Hank Williams songs in C6 with good results. Not too suprising because I think Williams' steel player (Don Helms?) used a E6 tuning? I will try to post a Hank Williams clip in C6 soon. |
Junior King Member From: Osceola, Iowa, USA
|
posted 15 January 2006 09:29 PM
profile send email edit
C6, Theres lots of free tabs and things about C6 on the internet. Try this sight for Hanks Tab, Cold Cold Heart. www.playsteelguitar.com/dougs_tab.htm |
J D Sauser Member From: E-03700-DENIA (Costa Blanca), Spain
|
posted 16 January 2006 01:07 AM
profile send email edit
Right, your friend would probably need a 10 string pedal steel with at least 3 pedals and 4 to 5 knee levers. However (since this is the non pedal forum), E9th sounds have been played on non pedal by those who did not get immediate acces to a pedal steel in the old days, just after Bud Issacs surprised everyone with his new sounds... so if your friend wants to dabble on a 6 or 8 string and explore some of these sounds, this may be possible. How? Well, I'd need some help from the board here to refresh my memory, but I do remember Buddy Emmons or somebody else in his name posting one of his non pedal tunings elaborated just for that. It was an "inside out"-tuning, meaning that it had some additional middle strings out as strings 1 and 2, much like the so called "chromatics" on standard E9th today (but tuned differently) , which gave some more space for quick and accurate pedal snapping like slants over 1 and two frets. Sound clips have been posted too somewhere. I tried it back then (maybe 6 or 7 years ago?) and it worked quite easy. Still, it will just give you a basic E9th sound... playing styles have evolved quite a bit since then. Jerry Byrd has played an open 8 string non pedal E9th tuning emulating much of the later slow and more complex E9th pedal playing styles... but I am not going to suggest for your friend to try to emulate JB just for starters  ... J-D.
[This message was edited by J D Sauser on 16 January 2006 at 01:12 AM.] |