|
 The Steel Guitar Forum
 Wanted To Buy
 Emmons volume pedal support brackets
|
| next newest topic | next oldest topic |
| Author | Topic: Emmons volume pedal support brackets |
|
Jim Witt Member From: California, USA |
posted 02 November 2005 08:15 AM
profile
Hello. Im looking to buy the two rectangular metal brackets (and hardware) that attach to the foot pedal rail that an Emmons volume pedal sits on. Thanks, Jim. |
|
Roger Kelly Member From: Mount Carmel, TN. 37645 |
posted 02 November 2005 05:14 PM
profile
You can get them here.... http://www.emmonsguitar.net/replacementparts5.htm |
|
Charles Dempsey Member From: The Cradle of the Stars. |
posted 02 November 2005 07:27 PM
profile
I made a set for my first Emmons out of 1/8" aluminum. Size about 1" X 2", round the corners and smooth the edges with a file, mark the holes, drill and tap for 5/32 (I think it's 5/32). Watch out for the hole position on the right one because it has to butt up next to the leg holder block. Steel might be better in the long run, but the aluminum is holding up fine. Charlie |
|
Jim Witt Member From: California, USA |
posted 02 November 2005 09:23 PM
profile
Thanks for the info guys! Jim. |
All times are Pacific (US) | next newest topic | next oldest topic |
 |
|
Contact Us | The Pedal Steel Pages
Note: Messages not explicitly copyrighted are in the Public Domain.
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.46