Nashville400/RV3 Settings - The Steel Guitar Forum

Steel Guitar Strings Strings & instruction for lap steel, Hawaiian & pedal steel guitars http://SteelGuitarShopper.com		Ray Price Shuffles Classic country shuffle styles for Band-in-a-Box, by BIAB guru Jim Baron. http://steelguitarmusic.com
This Forum is CLOSED. Go to bb.steelguitarforum.com to read and post new messages.

The Steel Guitar Forum

Nashville400/RV3 Settings

your profile | join | preferences | help | search

next newest topic | next oldest topic

Author	Topic: Nashville400/RV3 Settings
Chris Caruso Member From: Milford Massachusetts USA	posted 03 March 2002 06:16 PM profile Any suggestions on the reverb settings on the Nashville 400 and the RV3 settings when used together. I just picked up the RV3 and need a good starting point. (After plugging it in)!!! ------------------ D-10 Fessenden
Jim Cohen Member From: Philadelphia, PA	posted 03 March 2002 08:06 PM profile Hey, Chris. When I use my RV3 with my Nashville 400, I just use the delay part on the RV3 and use the reverb of the NV400. Of course, you gotta see what sounds best to your ear, so your mileage may vary! See ya at the shows, pal! Jim
Joey Ace Sysop From: Southern Ontario, Canada	posted 04 March 2002 01:28 PM profile I use a RV-3 set to "Lloyd Specs" Setting #7 which is plate 'verb + delay Mix - 7:30/8:00 o'clock Feedback - 11 o'clock Delay Time - 1 o'clock into a Nash 400 (with Nash's Reverb set to ZERO)
Ron Randall Member From: Dallas, Texas, USA	posted 04 March 2002 06:24 PM profile Ditto. No reverb on N400. If the reverb is too much, back it down to 4,5,or 6. Great unit.
Chris Caruso Member From: Milford Massachusetts USA	posted 05 March 2002 06:34 PM profile Thanks for the info. Should I put it in line between the pedal and the amp or use the effects patch on the amp?
Joey Ace Sysop From: Southern Ontario, Canada	posted 05 March 2002 06:54 PM profile I use the rear effects patch, small patch cables, the RV-3 sets on top of the amp. I only turn it off to tune. I once tried it into the front standard input. I didn't notice a difference.

All times are Pacific (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | The Pedal Steel Pages

Note: Messages not explicitly copyrighted are in the Public Domain.

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.46

Our mailing address is:
The Steel Guitar Forum
148 South Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support the Forum