|
Author
|
Topic: Reverb tank ID number for a LTD 400
|
Ken Fox
Member From: Ray City, GA USA
|
posted 18 December 2002 11:34 AM
profile
Got a chassis only coming and I need to get a tank. Anyone know the Accutronics parts#? |
Larry Bell
Member From: Englewood, Florida
|
posted 18 December 2002 03:45 PM
profile
4EB2C1B is what Peavey just installed in my late 70s Session 400. It's the same amp, so I'd suspect that's the proper tank.Mike? ------------------
Larry Bell - email: larry@larrybell.org - gigs - Home Page
2000 Fessenden S-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro |
Ken Fox
Member From: Ray City, GA USA
|
posted 18 December 2002 05:06 PM
profile
That should be it. My Mojotone catalogue calls out that number as a general Peavey replacement. I appreciate the info, it never hurts to double check these things!!! |
Donny Hinson
Member From: Balto., Md. U.S.A.
|
posted 18 December 2002 05:20 PM
profile
Ken, they're a lot cheaper at Antique Electronics than they are at Mojotone!  |
Ken Fox
Member From: Ray City, GA USA
|
posted 18 December 2002 06:41 PM
profile
Actually they are $3.00 less at Mojotone. I have both catalogues. Unless you are a dealer with Mojotone (and I am), their prices are twice what the catlogue has in it! You can't afford to buy online at their posted prices! I use both companies and they are both super to work with. [This message was edited by Ken Fox on 18 December 2002 at 07:40 PM.] |
David Decker
Member From: Canton, Ohio, USA
|
posted 19 December 2002 03:23 AM
profile
Ken call Peavey parts. They will sell to you direct and there prices are very good.
|
Donny Hinson
Member From: Balto., Md. U.S.A.
|
posted 19 December 2002 04:42 AM
profile
$18.86 now at Ant. Elect. Sup. |
Mike Brown
Member From: Meridian, Mississippi USA
|
posted 19 December 2002 06:20 AM
profile
We do have the original Accutronics reverb tank available. The part number is #71011114 and it cost $48.33. You may contact our parts department toll free at 1-877-732-8391. |
Ken Fox
Member From: Ray City, GA USA
|
posted 19 December 2002 09:13 AM
profile
Thanks for the all the info, guys. Looks like I may be putting the LTD in a Pacer cab (if it fits) and use a BW, 1203-4 speaker. Should be dynamite in a small package! Can't wait to get this one up and running. Always a project going on around here. Just finishing a total cosmetic and electrical on a 1971 Super Reverb with 1969 CTS alnicos. I am betting that will be a nice one too. |
The Steel Guitar Forum
