|
Author
|
Topic: Amplifiers
|
Denny Mohan
Member From: BC, Canada
|
posted 27 January 2006 07:31 PM
profile
Does anyone know how to remove the grill from an LTD 400? |
John Steele
Member From: Renfrew, Ontario, Canada
|
posted 28 January 2006 08:58 AM
profile
Hey Denny,
It sure is nice to see you in here, my friend.
I can't answer your question, but I have a mutual friend of ours coming to bunk at my house tonight, and I'm going to make him come on here and answer your question. 
I hope everything is great with you and yours, and I see you again soon.
-John |
Jerry Roller
Member From: Van Buren, Arkansas USA
|
posted 28 January 2006 09:33 AM
profile
Denny, I believe your speaker baffle has screws into it from the back. There are some 3/4" x 3/4" wood mounting strips behind the baffle. Remove the 8 screw and the whole speaker baffle comes out including the speaker. To remove the grille cloth you then remove the aluminum colored vertical trim strips then the grille cloth.
Jerry |
Denny Mohan
Member From: BC, Canada
|
posted 29 January 2006 04:00 PM
profile
Hi John,
Glad to hear from you. I'm going out to visit with Al Brisco in a few weeks. I'm going to work with him and learn how to set up the pp Emmons. I won't be able to make the Dallas show, but will be in touch with you when I get to Al's. Got that amp all figured out and I'll keep in touch and take care. |
Denny Mohan
Member From: BC, Canada
|
posted 29 January 2006 04:04 PM
profile
Hi Jerry,
Thanks for the quick reply. I think I can do the job now!! I've answere you twice I hope you get one of them as I don't really know much about computers. |
Ken Fox
Member From: Ray City, GA USA
|
posted 29 January 2006 05:02 PM
profile
Also that old cloth is not available at Peavey. You can get the same at Mojotone, it is called Fender black! |
Michael Johnstone
Member From: Sylmar,Ca. USA
|
posted 30 January 2006 07:49 AM
profile
On the 5 Peavey amps I've had,the grille is held on with velcro and you can just pop it off from the front with a putty knife or screwdriver. The speaker baffle is a seperate piece. -MJ- |
Mike Brown
Member From: Meridian, Mississippi USA
|
posted 30 January 2006 09:29 AM
profile
The LTD 400 was designed a bit differently than later Peavey steel amplifiers in that the grill cloth is secured to the baffle via staples. So, the complete baffle is secured to the cabinet and the speaker can be removed from the baffle via speaker nuts. |
John Cadeau
Member From: Surrey,B.C. Canada
|
posted 30 January 2006 03:24 PM
profile
Hey Denny how the heck are you. It's been a long time. I was wondering when I'd see your name pop up here. Next time you get over here to Canada give me a call. Next time I'm over on the island I'll give you a call. All the best.
J.C. |
The Steel Guitar Forum
