Steel Guitar Strings
Strings & instruction for lap steel, Hawaiian & pedal steel guitars
http://SteelGuitarShopper.com
Ray Price Shuffles
Classic country shuffle styles for Band-in-a-Box, by BIAB guru Jim Baron.
http://steelguitarmusic.com

This Forum is CLOSED.
Go to bb.steelguitarforum.com to read and post new messages.


  The Steel Guitar Forum
  Pedal Steel
  When did the G 1st string become a D on C6?

Post New Topic  
your profile | join | preferences | help | search

next newest topic | next oldest topic
Author Topic:   When did the G 1st string become a D on C6?
Bob Smith
Member

From: Allentown, New Jersey, USA

posted 06 March 2003 07:02 PM     profile     
Im a new player that spends most(all) of my time with the E9 tuning. I have noticed that a D on the 1 st String of the back neck(C6) seems to be the standard these days.How long has this been the norm? Who sets the standards for this kind of thing? And what was wrong with the G up there anyway? Didnt all the C6 heroes from yesteryear have a G up there instead of a D? Im just curious as hell. Wonderin bob
BobbeSeymour
Member

From: Hendersonville TN USA

posted 06 March 2003 08:28 PM     profile     
When someone decided that one chromatic tuning wasn't enough?
I give up, when?

I might say that It ain't a standard thing yet, and possibly it may never be, but then again, only time will tell. And I'm about out of it. Bye------->
C Dixon
Member

From: Duluth, GA USA

posted 06 March 2003 08:52 PM     profile     
I don't know when, but I do believe it was Buddy Emmons who came up with it. And it fills a big gap when playing fast single note runs. It is a long way (musically) from C to E and this D note fits that bill.

Further, the high G note was always been a bit thin to me. One small problem with it is if one tunes JI, it is difficult to decide on whether to tune it to the 4th string A or 5th string G.

I believe BE may have used this tuning on his famous "black album". But I am not positive.

carl

Eric West
Member

From: Portland, Oregon, USA

posted 06 March 2003 11:34 PM     profile     
Buddy Charleton started doing it (with his students) in the fall of 78, as well as starting to block with his ring finger. I was told it was because BE was doing it.

It's a good thing Mr Emmons didn't jump off a cliff that year

I think they both started playing and endorsing Sierras at the same time too.

Any guess as to who got one first?

EJL

Roger Rettig
Member

From: NAPLES, FL

posted 07 March 2003 01:55 AM     profile     
Buddy still had the high 'G' back when he did the black album.

RR

Doug Seymour
Member

From: Jamestown NY USA

posted 07 March 2003 05:48 AM     profile     
I have to agree with Carl (us old folks have to stick together!) I always thought the G was too thin also. Chalker's top string was
an E. (Jerry Byrd's also!) Raising the 3rd string C on the C6th to C# (relative to the E raising to F on your E9th tuning) gives you an A chord on 2,3&4, same voicing as the 1,2&3 if you're using the G on top. Works for me or it did anyway when my steel wasn't in the closet! (I don't think it will fit under my bed.....my new archtop won't either, so that's in another closet, but it's much easier to set up when I can't get a tune out of my head!)

[This message was edited by Doug Seymour on 07 March 2003 at 05:51 AM.]

Buddy Emmons
Member

From: Hermitage, TN USA

posted 07 March 2003 07:20 AM     profile     
I was using the D note before the Black Album was recorded but had written a song called Kicks To Boot, which required the high G string for the melody. Rather than experiment with the D on the rest of the songs, I opted to use the high G on everything, as I was more comfortable with it. In retrospect I wish I hadn't, because I started using the D string full time after the album was released.
Jim Smith
Member

From: Plano, TX, USA

posted 07 March 2003 07:25 AM     profile     
Buddy, "Are you sure?"
Glenn Austin
Member

From: Montreal, Canada

posted 07 March 2003 07:40 AM     profile     
I can't understand why you can't buy standard C6 strings with the D on top. All the C6 tab I have has a D on top.
Tony Prior
Member

From: Charlotte NC

posted 07 March 2003 08:05 AM     profile     
So Buddy, the Black Album was a trick on us ?

There we were tuning to the G and there you were tuning to the D ( after the album of course )..and no Internet to set us straight...

It's b0b's fault for not inventing the internet sooner...

thanks
tp

[This message was edited by Tony Prior on 07 March 2003 at 03:58 PM.]

Roger Rettig
Member

From: NAPLES, FL

posted 07 March 2003 08:20 AM     profile     
Sorry about that, Buddy! I made the 'post' in light of the fact that you'd quoted 'Kicks to Boot' (using the high 'G') as a possible disincentive to making a book of 'tab' for the black album available - I therefore assumed the recording pre-dated your use of the 'D'.

That'll teach me to be a smart-a**!

I'd still like to see that 'tab' one day, though....

RR

Larry Bell
Member

From: Englewood, Florida

posted 07 March 2003 10:40 AM     profile     
Although Buddy may not agree ( ), one advantage of the U-12 (E9/B6) is that you can easily have BOTH, PLUS the equivalent of a high sixth on top (like the A above the G, if you use the G on top).

Just a thought.

------------------
Larry Bell - email: larry@larrybell.org - gigs - Home Page
2003 Fessenden S/D-12 8x8, 2000 Fessenden S-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps

Eric West
Member

From: Portland, Oregon, USA

posted 07 March 2003 11:58 AM     profile     
When my lessons included a section that had previously required a "top G" "we" would go five frets up with the Maj79 pedal. On Kicks to boot, it was just close enough to be able to hit and still make the next chord. I've been getting this one "out" again. I remarked in the "tab" section that the Lead Line is indeed ultimate "economy of motion".

On "Almost to Tulsa" the open G on the head was merely replaced with the open D ( in my lesson). Also, it was not raised or lowered. Also at the position, of course, the 7th note is only a pedal away. I think in R the D on one of the last IV chord sections used this. At least I have from under my shade tree.

I'm still, after getting a copy of Mr C's "Kaylee" tape, trying to figure out all those flute licks..

Hmm...

Pete Burak
Member

From: Portland, OR USA

posted 07 March 2003 12:06 PM     profile     
I've had a similar demo by a D10 player showing me how you go up 3 frets and hold a lever in to play in the "G on Top" position.

As an S12U player, it just had me shaking my head, thinking, you have to hold a lever in to play in that position?... now what is it you don't like about S12U?... having to hold a lever in?

Oh Brother!

Gaylon Mathews
Member

From: Jasper, Georgia

posted 07 March 2003 12:16 PM     profile     
Glenn,

SIT has C6th strings with a D on top.

------------------
Gaylon's Homepage
www.geocities.com/nashville/1064

Craig Collins & High Lonesome
www.craigcollins.org

Rick Schmidt
Member

From: Carlsbad, CA. USA

posted 07 March 2003 01:20 PM     profile     
One of the reasons I still use the G on my D10 is the cool chord combinations I get when the 5th pedal raises the G to G# (which use to be standard). Pedals 4&5 and 5&6 etc. make great closely voiced jazz sounds on those high groups of 4 strings! (Ok I admit I like outside disonant sounding chords. )
Did you lose some of those chords when you changed to the D note? I have a D12 also with D and G both (also the C to C# raise), but I havnt been able to find those voicings anywhere else. Lemme know what I'm doing wrong...thanks.
Larry Bell
Member

From: Englewood, Florida

posted 07 March 2003 02:37 PM     profile     
Pete,
That lever is C to C# -- raising the tonic 1/2 step -- like the F lever on E9. Since the C6 tuning already has the 6th to get the A+F inversion you only need the equivalent of the F lever -- the C to C# change.

I'd never thought about using the Ma9 pedal for that purpose -- but I just tried it and sure enough it works.

------------------
Larry Bell - email: larry@larrybell.org - gigs - Home Page
2003 Fessenden S/D-12 8x8, 2000 Fessenden S-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps

Bobby Lee
Sysop

From: Cloverdale, North California, USA

posted 07 March 2003 03:48 PM     profile     
I have both on my 12 string C6th.

The Jagwire C6th string sets in the Forum catalog come with D .015 as the first string, but you can substitute G .012 at no charge if you want.

------------------
Bobby Lee - email: quasar@b0b.com - gigs - CDs
Sierra Session 12 (E9), Williams 400X (Emaj9, D6), Sierra Olympic 12 (C6add9), Sierra Laptop 8 (D13), Fender Stringmaster (E13, A6),
Roland Handsonic, Line 6 Variax

BobbeSeymour
Member

From: Hendersonville TN USA

posted 07 March 2003 05:34 PM     profile     
Cobra Coil comes with any string you want on top, and any other substitute guages you want. We can also keep your guages on file and send you your custom sets anytime you reorder. You could put a .070 on top if you wished.
Cobra Coil, Major outlet:
www.steelguitar.net
sales@steelguitar.net
Wayne Carver
Member

From: Martinez, Georgia, USA

posted 07 March 2003 09:32 PM     profile     
I am currently learning/playing on a 6 string C6 lap steel. I am in the process of making a 10 string console. I was thinking of tuning it C6 with the G on top. Is this probably best for a newby?
Peter
Member

From: Cape Town, South Africa

posted 08 March 2003 01:01 AM     profile     
When did the G 1st string become a D on C6?

I've heard it was 10h12 AM on October 24 in 1962.

I got this from the other forum.

------------------
Peter den Hartogh-Fender Artist S10-Remington U12-Hilton Volume Pedal-Gibson BR4 lapsteel-Guya "Stringmaster" Copy-MusicMan112RP-Peavy Rage158- - My Animation College in South Africa

Bob Smith
Member

From: Allentown, New Jersey, USA

posted 08 March 2003 07:08 AM     profile     
Well, I guess what made me ask these questions was the fact that my guitar was tuned with a G on top when i bought it.I also have a beginner C6 course by Mr. Jernigan who also tunes his guitar with a G on the first string( i guess its an older course) Anyway my main concern ,is that when i start putting time into learning that tuning, I dont want to learn something thats outdated or obscure and have to change it later. Seems like most guys want the D up there! bob
Jim Smith
Member

From: Plano, TX, USA

posted 08 March 2003 07:14 AM     profile     
I'm pretty sure Herby Wallace still uses the high G, and Doug Jernigan does too. Of course you could just get a D-11 or D-12 and have both strings up there.

------------------
Jim Smith jimsmith94@attbi.com
-=Dekley D-12 10&12=-
-=Fessenden D-12 9&9 (It's finally here!)=-
Stereo Steel rig w/Boss GX-700
IVL SteelRider w/JV-880

Pete Burak
Member

From: Portland, OR USA

posted 08 March 2003 08:57 AM     profile     
Larry,
I've been raising both B's to C on the Boo-Wah pedal for a few years now.
It's makes the Boo-Wha much more useful in the swing stuff I like to play.
I too find it analogous to the A+F position.
It also opens up a nice A6 fatty on the first fret (approx. strings 10-4) with Boo-wha + P5 (which are next to each other on my axe). Let off the BW for the IV7,. ect...

Larry Bell
Member

From: Englewood, Florida

posted 08 March 2003 09:22 AM     profile     
That's a great idea, Pete.
I assume you split the Bb lever to give you the 7#9 chord??????

Unfortunately, I can't do that because I already have three raises on the 5th string and Fessies don't readily accept a 4th raise or lower like you can do on some guitars. Did you give up one of the 'usual' B to C# on the 5th or did you use a tunable collar like an old ShoBud? (I assume this is on your Sierra, about whose mechanics I know next to nothing)

------------------
Larry Bell - email: larry@larrybell.org - gigs - Home Page
2003 Fessenden S/D-12 8x8, 2000 Fessenden S-12 8x8, 1969 Emmons S-12 6x6, 1971 Dobro, Standel and Peavey Amps

Pete Burak
Member

From: Portland, OR USA

posted 08 March 2003 09:39 AM     profile     
I ditched the C pedal so that opened up a string 5 raise.
I added it to my Emmons by adding a bell crank + half tuner to that crossrod and pullrod.
I use the B>Bb split on both strings 9 and 5, so if I need the traditional BW effect I just disenguage the string 5, B to C, at the endplate (takes just a few turns to back it off, maybe 3 seconds) or half tuner.
My swing playing with the band is mostly on strings 10-1. I don't use strings 11 and 12 a whole lot in the 6th tuning. I use them way more for Ext E9th.
So for me, needing the traditional BW effect would be more of a specialty thing anyway.
I use the BW pedal way more (with both B's >C) to get the VI cord on the root fret, 7th chord 3 frets up, V7 chord 2 frets back, in conjuntion with P5, ect...

[This message was edited by Pete Burak on 08 March 2003 at 10:25 AM.]

Byron Walcher
Member

From: Ketchum, Idaho, USA

posted 08 March 2003 12:18 PM     profile     
I think Doug Jernigan has switched, the tab book for "Jazz by Jernigan" shows D on top.

------------------
Lashley Legrande D10 8x7,Emmons Legrande 8x7, Sierra Lap-Top, Webb Amps

All times are Pacific (US)

next newest topic | next oldest topic

Administrative Options: Close Topic | Archive/Move | Delete Topic
Post New Topic  
Hop to:

Contact Us | The Pedal Steel Pages

Note: Messages not explicitly copyrighted are in the Public Domain.

Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.46

Our mailing address is:
The Steel Guitar Forum
148 South Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support the Forum