|
 The Steel Guitar Forum
 Music
 Steel Guitar in the Mix
|
| next newest topic | next oldest topic |
| Author | Topic: Steel Guitar in the Mix |
|
John Macy Member From: Denver, CO USA |
posted 15 December 1999 01:27 PM
profile
I thought I'd throw up this quote from Chuck Ainlay, one of Nashville's leading engineer/mixers. It's kinda interesting. And please don't perceive this as a cut--as a mixer, he is a serious idol to me, and his steel sounds are second-to-none. "Ainlay's approach to panning instruments in a country mix derives from seat-of-the-pants experience--that is, based on folks sitting in their vehicles. 'I think most people listen to country music while driving around in a car or truck,' he explains. 'When sitting in the driver's seat, the thing I want farthest away from me is the steel guitar. Traditionally, the steel has a lot of reverb on it--kind of a wash--so I like to hear it farthest away, panned far right. I definitely don't want it beside me, on the left.'" I have most always panned steel to the right, but never thought about it in those terms. |
|
Eddie Lange Member From: Joelton, Tennessee |
posted 15 December 1999 05:33 PM
profile
That is interesting. I kinda prefer the steel tearin' my head off. ------------------ |
|
Bob Hoffnar Member From: Brooklyn, NY |
posted 15 December 1999 06:41 PM
profile
The thing I noticed about that interview was the part about the steel needing minimal treatment. No dynamic processing ! Just a little EQ and blending reverb. That means the steel player is doing his job. Bob |
|
Jack Stoner Sysop From: Inverness, Florida |
posted 16 December 1999 04:32 AM
profile
I've never given it much thought - as far as right or left channel. Most of the current stuff seems to be mixed equally on both channels. Back in the early years of stereo there were a lot of records with definate separation and maybe the steel on one channel and the lead guitar in the other, etc. The thing I was taught from an engineer (who was taught by a Nashville engineer) was to make it sound good on a cheap radio/speaker. If the mix sounded good on a cheap radio, it would sound good on anything. |
|
Donny Hinson Member From: Balto., Md. U.S.A. |
posted 16 December 1999 09:17 AM
profile
Jack Stoner is right on the money here. The old records had steel in one channel, and lead in the other. If you panned (GOD, I hate that word!) to hear the lead, the steel was low, with a lot of reverb. If you panned (there's that word again!) to hear the steel, the lead would be low, with a lot of reverb. At least that worked! You could hear what you wanted in the mix (the voice and rhythm was often centered, or balanced. This was great for us musicians. Nowadays, you're stuck with whatever the (mixer) engineer likes, and it's plain that old Chuck Ainley don't like steel! I would rather hear the steel and lead predominate than the drums and cymbals. But in the majority of today's recordings, especially the fast stuff, it seems we're STUCK with drums and cymbals...go figure! And as far as Chuck's reasons for panning steel on the right, they are unlogical too. NOBODY listens to music in the car these days! Haven't you noticed, Chuck? Everyone's talking on their cell-phone instead! |
|
Bobby Lee Sysop From: Cloverdale, North California, USA |
posted 16 December 1999 01:40 PM
profile
I like the steel in the center, as the loudest instrument with minimal effects and lots of presence. I also like to pan the singer to the far right, with tons of reverb. I think it would be absolutely great if Faith Hill's records were mixed this way. ------------------ |
|
Ron Page Member From: Cincinnati, OH USA |
posted 16 December 1999 05:10 PM
profile
Those lucky British drivers! ------------------ |
|
John Macy Member From: Denver, CO USA |
posted 18 December 1999 02:50 PM
profile
Actually, ole Chuck loves steel, just listen to a Strait record. I should have mentioned in the next paragraph, he pans the guitar to the left. Steel to the right, guitar to the left. Sorta like all those records you mentioned. And I think Bob's point answers a lot of questions that have been raised in the past about engineers and producers messing with the steel sound. |
All times are Pacific (US) | next newest topic | next oldest topic |
 |
|
Contact Us | The Pedal Steel Pages
Note: Messages not explicitly copyrighted are in the Public Domain.
Powered by Infopop www.infopop.com © 2000
Ultimate Bulletin Board 5.46