Any advice on settings for DD-3 & Nashville 400

Steel Guitar Strings Strings & instruction for lap steel, Hawaiian & pedal steel guitars http://SteelGuitarShopper.com		Ray Price Shuffles Classic country shuffle styles for Band-in-a-Box, by BIAB guru Jim Baron. http://steelguitarmusic.com
This Forum is CLOSED. Go to bb.steelguitarforum.com to read and post new messages.

Author	Topic: Any advice on settings for DD-3 & Nashville 400
Russ Member From: Easton, Pa. Northampton	posted 11 February 2000 09:38 AM profile Can anyone give me any preferd settings for the Boss DD-3 Digital Delay & the reverb on the Nashville 400 & any best ways to connect them up for the best sound. I am new at this & would welcome any & all comments Thank you Russ, ------------------ Russ Kern
Chris Lang Member From: Muskogee	posted 16 February 2000 07:51 AM profile Russ, I am sorry that you have'nt gotten a reply on your question. I will tell you how I had mine set up. You can either run your steel into the DD-3, then out to the amp.,or run the DD-3 in the effects loop. As for the settings, that is a matter of taste. I have found that most delays used in steel applications require only milliseconds. The best effect that I got from my DD-3, was to hook up and turn your depth (or level) about 3/4 way up. Then start turning the time up from zero untill you can hear a quick, or "Slapback" delay..Most of the steelers prefer this "Slapback" delay, because the delay is "in and out" and does not carry over into the next note. I have forgotten exactly what controls the DD-3 has, but if you email me back with them, I will offer advice. As for the reverb,I have found that when you use an external effects unit, you will tend to need less reverb. Once again, this is all subjective and is a matter of personal taste. ------------------

All times are Pacific (US)	next newest topic \| next oldest topic
Administrative Options: Close Topic \| Archive/Move \| Delete Topic
	Hop to:

Contact Us | The Pedal Steel Pages

Note: Messages not explicitly copyrighted are in the Public Domain.

Our mailing address is:
The Steel Guitar Forum
148 South Cloverdale Blvd.
Cloverdale, CA 95425 USA

Support the Forum