|
Author
|
Topic: Hot rod Deville 2x12 settings?
|
Terry Sneed
Member From: El Dorado, Arkansas, USA
|
posted 22 July 2006 01:48 PM
profile
Could I get a few of you guys that have played a Hot Rod Deville with 2x12s to share your settings. I just bought one, and
I want to play it at church tomorrow, and would like to have it set half way decent as to get a good tone.  I'd appreciate it very much. I've done a search but can't find any settings.Terry |
David Higginbotham
Member From: Lake Charles, Louisiana, USA
|
posted 22 July 2006 02:35 PM
profile
Terry, my settings for steel are: Bass-12, mids-2.5, treble-2, presence-8.5, reverb-3 using the clean channel. That may be a little much on the bass control for some tho. I also add a little delay with a pedal. Hope this helps.
Dave |
Terry Sneed
Member From: El Dorado, Arkansas, USA
|
posted 22 July 2006 02:46 PM
profile
I'm sorry David, I should have made myself more clear, I was talkin about setting for 6 string. Tele to be exact.ThanksTerry ------------------
Mullen RP D10 /8x5 / Nashville 112 x 2 / American Tele
Thank God for music. |
Larry Robbins
Member From: Fort Edward, New York, USA
|
posted 22 July 2006 03:25 PM
profile
http://www.tdpri.com/forum/index.php
Terry,
Check this site out and you can do a search there as well. They have a lot of good info on all things Fender.
Good Luck in your search for tone  ------------------
72 Professional 8&5,73 PRO II 8&4, 79/80 PRO III 8&4,Fender Steelking, Hilton pedal, USA Tele, Fender Twin,Peterson tuner,Tut Taylor Reso's and Twang to the Bone!! |
Terry Sneed
Member From: El Dorado, Arkansas, USA
|
posted 23 July 2006 07:06 PM
profile
Thanks Larry. I have that site book marked, I just thought since there were several Tele players on this forum I could get some help here. I'll check over there.Terry ------------------
Mullen RP D10 /8x5 / Nashville 112 x 2 / American Tele
Thank God for music. |
Tony Prior
Member From: Charlotte NC
|
posted 25 July 2006 03:55 AM
profile
Hi Terry, congrats on the amp purchase.Here is basically what I do with the Tele's. Not sure what the numbers are but in clok refrences.. clean channel for Tele.. Treble 11:00
Bass 1:00
Mids 11:00 or 12:00( less for steel )
presence 9:00 this amp can be very strong on the hi end with the presence and treble , just be aware. good luck t [This message was edited by Tony Prior on 25 July 2006 at 08:19 AM.] |
Terry Sneed
Member From: El Dorado, Arkansas, USA
|
posted 25 July 2006 12:58 PM
profile
Thanks Tony, I trust your judgment on settings for this particular amp, more than those guys over on TDPRI. I'll try those.
BTW> I tried my HRD and Nashville 112 together, and got what I was hoping for, a real good steel sound. Now I can use those two amps for steel and just use the HRD for Tele. Just right!Terry[This message was edited by Terry Sneed on 25 July 2006 at 01:04 PM.] |
The Steel Guitar Forum
