|
Author
|
Topic: Ideal settings for Nashville 1000
|
Pat Richardson
Member From: Paxton, Illinois, USA
|
posted 02 December 2006 03:11 AM
profile
I am test driving a friends Nashville 1000 amp, and would like some of you experts out here on the fourm to give me some input on what the best settings with out any other preamps or other toys are for it . I just want to plug a chord into the amp from tha volume petal. Thanks Pat------------------
SD-10 GFI Ultra, Peavey Session 400 Limited |
Ernest Cawby
Member From: Lake City, Florida, USA
|
posted 02 December 2006 10:43 AM
profile
The front end sets up like the Nashville 112.
Turn the mid all the way down and bass all the way up, most all others near 12:00 and then tweek from there, for what sounds best to you.ernie |
Jack Stoner
Sysop From: Inverness, Florida
|
posted 02 December 2006 11:15 AM
profile
With my Franklin D-10 (and Lawrence 710 pickups) I set both my 1000 and 112 the same. My basic set up is, Low +9, Mid - -3 and 800Hz, High and Presence slightly postitive (approx +1). |
Jack Ritter
Member From: Enid, Oklahoma, USA
|
posted 02 December 2006 12:23 PM
profile
on my nv1000 with d10zumpre gn 4
lo+6
mid -6
shift 700
hi +3
pres -3
mstr gn 5 Jack |
John Bechtel
Member From: Nashville, Tennessee,U.S.A.
|
posted 02 December 2006 09:24 PM
profile
These are the EQ-Settings I settled on when I was using N~1000's:
Pre-Gain 3/4
Low +6
Mid –10.5
Shift 750Hz
High +3
Presence +3
Rev. 4
Master 8/10------------------
“Big John”
a.k.a. {Keoni Nui}
Current Equipment
|
Pat Richardson
Member From: Paxton, Illinois, USA
|
posted 03 December 2006 06:36 PM
profile
Does any one out here have play a GFI threw a 1000? If so with the GFI 2 pickups what settings do U use/ If not how about any guitar with George L E-66 pickups ? ------------------
SD-10 GFI Ultra, Peavey Session 400 Limited |
The Steel Guitar Forum
