|
Author
|
Topic: Help with Korg 301 dl Dynamic Echo
|
Ernie Pollock
Member From: Mt Savage, Md USA
|
posted 23 December 2006 05:36 AM
profile
I have been trying to find a manual for this Korg ToneWorks 301 dl, with no success, any of you guys know how to work this thing?? I would love to figure it out, but this one has me stumped cause it can be programed. Any help would be appreciated.thanks Ernie Pollock  ------------------
|
James Quackenbush
Member From: Pomona, New York, USA
|
posted 23 December 2006 10:00 AM
profile
Ernie ,
I have to look around for the instructions for my Korg DS distortion box ....Perhap's it works the same way ....From what I remember , you set things up the way you want , and then press down on the footswitch, and hold it for a bit ....The light will blink, and then stop....Then set it up with the controlls another way, and do the same thing...Hold down on the foot switch until it stops blinking ....The light will be Green for one preset and the light will turn Red for the 2nd preset ...You can only use the 2 presets ....Still pretty nice for a pedal ...I'll try to find the original instructions for my pedal and I'll scan them and send them to you after Christmas ....Fool around with it and see if my instructions help you at all ...Happy Holidays....Sincerely, Jim[This message was edited by James Quackenbush on 23 December 2006 at 10:01 AM.] [This message was edited by James Quackenbush on 23 December 2006 at 10:02 AM.] |
Ernie Pollock
Member From: Mt Savage, Md USA
|
posted 24 December 2006 05:13 AM
profile
Jim: Thanks alot, that just may be the secret, I have tried everything I could to get a manual for the Korg, with no luck. I will try your method.Ernie http://www.hereintown.net/~shobud75/stock.htm ------------------
| |
The Steel Guitar Forum
