|
Author
|
Topic: Zirconia bars...want one?
|
Jerry Lee Newberry
Member From: Van Buren, AR, USA
|
posted 09 November 2006 06:03 PM
profile
I WANT 2 OF THE BARS. SIZE 7/8.
Jerry[This message was edited by Jerry Lee Newberry on 09 November 2006 at 06:11 PM.]
|
Stephan Miller
Member From: Silver Spring, Maryland, USA
|
posted 10 November 2006 05:53 PM
profile
If there were a run of smaller bars, in the range of 2 3/4" to 3" in length, and 3/4" or 7/8" in diameter, I'd be interested. |
David Mason
Member From: Cambridge, MD, USA
|
posted 11 November 2006 04:35 AM
profile
Can I still get one delivered by Brooke Burke in a helium balloon, wrapped in lace? |
Bill Myers
Member From: Camp Hill, Pennsylvania, USA
|
posted 11 November 2006 04:43 AM
profile
15/16 x 3 3/8ths for me.... |
George Mc Lellan
Member From: Duluth, MN USA
|
posted 11 November 2006 05:15 AM
profile
15/16ths x 3&3/8th's but I will not commit to something without knowing the price. I sold my 7/8's Zirc to Jerry Roller because the 15/16's BJS felt better to me, if it would have been 15/16th's I would not have sold it. I like both bars equally.Geo |
Jerry Lee Newberry
Member From: Van Buren, AR, USA
|
posted 13 November 2006 05:53 AM
profile
George, My Jerry has been using the bar you sold Roller. HE LOVES IT!!!!!!!!! We are looking forward to buying 2 of them.
Donna
|
George Mc Lellan
Member From: Duluth, MN USA
|
posted 13 November 2006 07:43 AM
profile
They are indeed a really great bar. I'm still watching for the price of the 15/16th's x 3 & 3/8th's. I will buy one if the the price is right. Geo |
ed packard
Member From: Show Low AZ
|
posted 13 November 2006 08:02 AM
profile
So am I George, so am I. Step #1 is material qualifications...last week Leo said 3 to 4 weeks for that...you know what happens to schedules!My role in this has no $ involved...I am just bringing the customer to the maker, and translating PSG jargon to manufacturing info.[This message was edited by ed packard on 13 November 2006 at 09:14 AM.] |
Greg Simmons
Member From: Edmonton, Alberta, Canada
|
posted 15 November 2006 05:27 PM
profile
...a lil' bump and another request for a 15/16" x 3 3/8" ------------------
“Back then, everything was different, and you only saw it once; now everything’s the same and you see it over and over again"
-Peter Case
|
John Neff
Member From: Athens, GA
|
posted 15 November 2006 08:34 PM
profile
I'll take one. 15/16" X 3-3/8" |
Marty Nemanick
Member From: Madera, California, USA
|
posted 18 November 2006 10:43 AM
profile
Count me in on a 15/16 X 3 3/8.
Thanks, Marty |
ed packard
Member From: Show Low AZ
|
posted 21 November 2006 10:09 AM
profile
Just a post to let all interested know that things seem to be proceeding at the usual snails pace.Those that E mailed me direct have had their E mail forwarded to Leo. Those that have posted here have had their names, bar dimensions, E mail address, etc. put on a spreadsheet and sent to Leo. This "thing" has started, now with luck, I can get out of the loop and get back to things like the BEAST, the PST hardware mods, and the latest = SONIC PALETTE. |
Steve Epstein
Member From: Orinda, CA
|
posted 22 November 2006 05:42 PM
profile
I'm in. 3 3/4 length please. |
Joe McHam
Member From: Houston, TX, USA
|
posted 23 November 2006 08:51 AM
profile
I would like one 15/16" x 3 3/8" ..
Thanks |
James Quackenbush
Member From: Pomona, New York, USA
|
posted 23 November 2006 09:13 AM
profile
15/16 x 3 1/2 would work for me on a 12 string, but I could get by with a 3 3/8 depending on price ...Jim |
Gerald Ross
Member From: Ann Arbor, Michigan, USA
|
posted 12 December 2006 01:26 PM
profile
So, what's the latest on these?------------------
Gerald Ross
'Northwest Ann Arbor, Michigan's King Of The Hawaiian Steel Guitar' 
CEO, CIO, CFO - UkeTone Records
Gerald's Fingerstyle Guitar Website
Board of Directors Hawaiian Steel Guitar Association |
ed packard
Member From: Show Low AZ
|
posted 12 December 2006 01:37 PM
profile
I am told .... 100 pcs by end of Jan...15/16" dia 3+3/8 to 3+3/4" in 1/8" steps. Mail in $ target is US$150.00.The above to be confirmed on this thread when "for sure".[This message was edited by ed packard on 12 December 2006 at 02:48 PM.] |
Marco Schouten
Member From: Amsterdam, The Netherlands
|
posted 12 December 2006 02:43 PM
profile
I think you mean 3 3/8 to 3 3/4 ???------------------
Steelin' Greetings
Marco Schouten
Sho-Bud Baldwin Crossover converted to SD-10, Evans SE200
|
Mike Wheeler
Member From: Columbus, Ohio, USA
|
posted 12 December 2006 02:44 PM
profile
Ed, did you really mean 2+3/8 to 2+3/4??? Kinda short, don't 'cha think?? |
ed packard
Member From: Show Low AZ
|
posted 12 December 2006 02:50 PM
profile
Dang...can't cheat you folks out of an inch!!! Thanks. |
The Steel Guitar Forum
